DMX Snow Machine

Create falling snow effects indoors with our DMX Snow Machine.

Speed: 10-110 rpm
Hole diameter: 12,5 mm (0.5 in)
Drum length: 1,8 m (5.9 ft)

Apply the DMX Snow Machine in studios, at party venues, for your catwalk show, in concerts, in theaters or where you want.

Create snow effects or use the Snow Machine for your confetti. It is controlled via DMX where you can adjust both speed and positions as well as ques motions of the drum.

Very easy to mount with slim couplers and integrate in your existing stage design setup.

1.550,00 €
Rent this product

Description

With our DMX Snow Machine, you can very easily create artificial snowing effects for your stage.

It is designed with a motor and a drum with small holes. Fill your artificial snow (or confetti if you are to use it as a confetti machine) in the tube with small holes and you are ready to go. When the motor is rotating the tube, the snow/confetti slowly falls out of the tube to create the desired snowing effect.

You can control the speed of the machine which also means that you can control the speed of which the material is falling out of the tube.

So, with the DMX Snow Machine you have full control over the type of snowing effect you want.

Artificial & Fake Snow Machine Controlled by DMX

Like the rest of the Wahlberg product range you can control the DMX Snow Machine by DMX. It consists of a perforated aluminum tube with a motor on the side. It is built on the technique from the recognized Wahlberg Roll Down System.

This means that you can control the unit by DMX and make your artificial snow fall as you like by adjusting the speed of the unit. This is great if you e.g. want to use it as a Christmas snow machine where you need to make different kinds of snowing effects.

You can further control the snowing effect by the size of the fake snow or confetti in the tube. The larger pieces, the less it will “snow”. We have designed the Snow Machine drum for snowflakes of paper or plastic.

DMX Snow Machine for Stage

Our DMX Snow Machine is designed for any stage performance purpose. If you are looking for a solution for a snow effect machine this is ideal.

All you need to do is mount the unit above your stage, connect to DMX and electricity and it is ready to use. It is also possible to combine with other products. You can mount the unit on a Track System and this way move the snow machine to different positions of your stage.

You can use it as an indoor snow machine perfect for e.g. concert venues, party venues, theatres etc.

Theatrical Snow Machine

In theatre plays it can happen that you have a play that requires snowing effects. The DMX Snow Machine is great as a theatre snow machine because it is easy to operate.

This way you can make your theatrical snow fall in a natural and desired way, to reach the effect you are looking for. You can create gentle snow flurries or set the speed higher to increase the amount of snow. You can control the unit directly from the lighting console.

The DMX Snow Machine has many areas of application which makes it a very cheap snow machine. It is easy to setup, use and carry around to set up elsewhere after completed project.

The content of the DMX Snow Machine package

1 x DMX Snow Machine

2 x Manfrotto Slim coupler

2 x Mounting bolt, nut, and washers (M12) for slim coupler mounting

1 x PowerCon Male plug for power cable

1 x User manual

1 x Cheat sheet

Technical Details

Item number 288
Speed 10-110 rpm
Load capacity 56 L (14,8 Gal-us)
Hole diameter 12,5 mm (0.5 in)
Drum length 1,8 m (5.9 ft)
Voltage 100-240 VAC
Frequency 50-60 Hz
Power consumption 150 W (1,5-0,63A)
Power inlet Neutrik powerCON TRUE1 NACPX (F/M)
DMX control signal DMX 512 1990+DMX512A
DMX channels 6
DMX control connection 5 Pole XLR (F/M)
Noise emission ≈55 dB at 1 m (3.3 ft)
Ambient temperature 5-40 °C (41-104 °F)
Mounting clamp 2 x Slim eye coupler 42-52mm (2 in)
Motor 24 VDC, 92W
Duty cycle 50 % when running more than 30 min.
Shipping weight 11 kg (24.2 lb)
Weight - Motor unit 7,5 kg (16.5 lb)
Weight - Drum 1,3 kg/m (0.87 lb/ft)
Dimensions 1968 x 235 x 351 mm (77.5 x 9.3 x 13.8 in)
Dimensions - Motor unit 81,6 x 230 x 351 mm (3.2 x 9.1 x 13.8 in)
Dimensions - Drum (hexagonal) Ø235 x 1000-4000 mm (Ø9.3 x 39.4-157.5 in)

Downloads

Type Name
pdf 290.805.001_Manual-Mini_Rollup-1 Download
pdf 289.806.001_MiniRollDown-cheat-sheet_A5 Download
pdf 288.001.002_Spec_Sheet-DMX-snowmachine-Wahlberg Download
STEP 288.001.001_Snowmachine Download

Danish National Girls Choir Midsummer and Christmas concert, 2016

 

Read the case »

DMX Compatible

 

All Wahlberg products are DMX compatible. Read more about DMX control.

 

Learn more about the technology behind

Wahlberg Motion Design is a creative company devoted to the creation, innovation and design of products to create automatic DMX effects of stage props and lights.

 

Read more about Wahlberg Motion Design here

There are no products in the basket

This website uses cookies to improve your experience. 

Read more about cookies