Wahlberg Motion Design is a creative company devoted to the creation, innovation and design of products to create automatic DMX effects of stage props and lights.
For extra stability of the equipment being lifted, the Winch 25 Double is built with two wires.
|Lifting capacity:||25 kg (55.1 lb)|
|Lifting height:||10 m (32.8 ft)|
|Lifting speed:||5-40 cm/s (2-15.7 in/s)|
|Max cable current:||24 V, 2 A|
With the Winch 25 Double parallel lifting is made easy. The two drums on the same axel make sure that both wires run with the exact same speed.
It is possible to power the equipment thanks to the separately powered lifting wire providing 2-amp, 48 V electricity to the suspended unit.
Perfect for lifting your heavier electrical stage equipment up to 25 kg e.g. lamps, lasers, chandeliers etc.
With the Winch 25 Double it is very easy to create moving effects to your scenic elements. The double wire secures that the equipment is stable while being lifted and not spinning. You can make your equipment appear and disappear in and out of the stage area.
All movements are automated via DMX at the lighting desk, so you can avoid any manual handling.
When developing the light or stage design the Winch 25 Double can contribute in many different ways. This is because of the flexible way of installing and mounting the equipment. Extend your stage design with DMX automated vertical movements of your stage props.
The Winch 25 Double uses two active lift lines to maintain the equipment in a plain, steady position eliminating any rotation or sway while in motion.
As an extra advantage, it is also possible to increase the spacing between the drums. This is suitable in situations where the equipment mounted to the winch is very wide. Therefore, it would need extra space between the two wires to maintain the position when lifting.
Like the rest of the Wahlberg DMX Winches, the Winch 25 Double is compact enough to fit comfortably in a grid. You can attach it to small truss or mount to ceiling points while still providing the same lifting capacity.
It is suitable for heavier fabric rigging, or for lifting scenic elements such as chandeliers, mirrors and window units. By the DMX control of the built-in positioning system, you have full control over positions and speed at the lighting desk. So, you can easily adjust the movements.
Additionally, it is possible to set the top and bottom limits, so you can adapt the operating range to fit your scene and show.
The content of the Winch 25 Double package
1 x Winch 25 Double
2 x Manfrotto Slim coupler
1 x PowerCON NAC3FX-W female plug for power cable
1 x User manual
1 x Cheat sheet
|Lifting capacity||25 kg (55.1 lb)|
|Lifting height||10 m (32.8 ft)|
|Lifting speed||5-40 cm/s (2-15.7 in/s)|
|Through Connection - Input||Neutrik speakON NL4MP|
|Through Connection - Output||Neutrik speakON NL4MP|
|Through Connection - Power||2A/24VAC or DC|
|Through Connection - Signal|
|Power consumption||300 W (1,5-1,25 A)|
|Power inlet||Neutrik powerCON TRUE1 NACPX (F/M)|
|DMX control signal||DMX 512 1990+DMX512A|
|DMX control connection||5 Pole XLR (F/M)|
|Snap hook||2x8 mm (5/16 in) galvanized steel w/Bar 500 mm (19.7 in)|
|Fleet travel||76 mm (3 in)|
|Minimum load||1 kg (2.2 lb)|
|Noise emission||≈50 dB at 1 m (3.3 ft)|
|Ambient temperature||5-40 °C (41-104 °F)|
|Mounting clamp||4 x Slim eye coupler 42-52mm (2 in)|
|Motor||230 VAC, 0.25 kW|
|Duty cycle||30 % when running more than 10 min.|
|Lifting wire||2 mm (5/64 in) 7x7 PP coated galv. steel wire (EN 12385-4)|
|Minimum wire breaking load||280 kg (2746 N / 617 lb)|
|Wire safety factor||>10|
|Max cable current||24 V, 2 A|
|Expected wire lifetime - 5 kg (11 lb) load||Pending|
|Expected wire lifetime - 10 kg (22 lb) load||Pending|
|Expected wire lifetime - 20 kg (44.1 lb) load||Pending|
|Shipping weight||35 kg (55.12 lb)|
|Weight||32 kg (70.5 lb)|
|Dimensions||687 x 229 x 355 mm (27 x 9 x 14 in)|
0,00 € without taxes