Wahlberg Motion Design is a creative company devoted to the creation, innovation and design of products to create automatic DMX effects of stage props and lights.
The Winch 50 is a compact yet very powerful DMX controlled stage winch.
|Lifting capacity:||50 kg (110.2 lb)|
|Lifting height:||12,5 m (41 ft)|
|Lifting speed:||9-45 cm/s (3.5-17.7 in/s)|
It offers dynamic movements of heavy stage objects and maximum versatility for rigging solutions of your stage equipment up to 50 kilos.
Create beautiful moving effects for your stage equipment.
The Winch 50 has a lifting capacity of up to 50 kg, so you can enjoy all the great features for your heavy stage items.
If you have heavy load stage equipment that you want to create flying effects on stage, the Winch 50 is a great solution. It is a DMX Winch perfect for lifting heavier loads up to 50 kg. The winch is the strongest of all Wahlberg DMX winches. It is thus great for lifting stage equipment such as flats, ceiling pieces, picture frames and window units. Only your imagination is the limit.
Working alone or configured together, you can use the Winch 50 for flying dimensional set pieces or rigging heavier weight drapery fabrics. With the DMX control you can set positions and limits quick and easy. Complex motion cues can be written and recalled with ease, so the effects are automated as much as possible, directly from your lighting desk. Easily integrated in your stage design.
The Winch 50 is a great winch for lifting and moving stage props, screens, drapes, lights, etc. in and out of the stage sphere. Several winches can easily be connected as a chain, allowing for advanced and creative ways of making dynamic movements of several objects at the same time.
You can control the winch directly from the lighting desk. This way it can be controlled to fit and interact in line with the show and lighting design. The winch 50 has an advanced positioning system controlled from a 16-bit DMX channel. It is highly accurate; the winch stops within just 1 mm.
Furthermore, you can control the speed of the winch via DMX. It is also possible to set the upper and lower limits of the movement of the winch, thus adjusting its range of motion and your specific stage requirements.
The content of the Winch 50 package
1 x Winch 50
4 x Manfrotto Slim coupler
1 x PowerCON NAC3FX-W female plug for power cable
1 x User manual
1 x Cheat sheet
|Lifting capacity||50 kg (110.2 lb)|
|Lifting height||12,5 m (41 ft)|
|Lifting speed||9-45 cm/s (3.5-17.7 in/s)|
|Power consumption||500 W (2,4-2,1 A)|
|Power inlet||Neutrik powerCON TRUE1 NACPX (F/M)|
|DMX control signal||DMX 512 1990+DMX512A|
|DMX control connection||5 Pole XLR (F/M)|
|Snap hook||8 mm (5/16 in) galvanized steel|
|Fleet travel||83 mm (3.3 in)|
|Minimum load||5 kg (11.02 lb)|
|Noise emission||≈50 dB at 1m (3.3 ft)|
|Ambient temperature||5-40 °C (41-104 °F)|
|Mounting clamp||4 x Slim eye coupler 42-52mm (2 in)|
|Motor||230 VAC, 0.55 kW|
|Duty cycle||30 % when running more than 10 min.|
|Lifting wire||3 mm (1/8 in) 19x7 galv. steel wire (EN 12385-4)|
|Minimum wire breaking load||588 kg (5766 N / 1296 lb)|
|Wire safety factor||>10|
|Expected wire lifetime - 10 kg (22 lb) load||Pending|
|Expected wire lifetime - 20 kg (44.1 lb) load||Pending|
|Expected wire lifetime - 40 kg (88.2 lb) load||Pending|
|Shipping weight||31 kg (68.34 lb)|
|Shipping dimensions||32 x 31 x 46 cm (12.60 x 12.20 x 18.11 in)|
|Weight||29.1 kg (64.2 lb)|
|Dimensions||345 x 298 x 445 mm (13,6 x 11,7 x 17,5 in)|
0,00 € without taxes