Wahlberg Motion Design is a creative company devoted to the creation, innovation and design of products to create automatic DMX effects of stage props and lights.
Vertically lift stage equipment for elevating effects.
|Lifting capacity - Pushing up:||60 kg (132.3 lb)|
|Lifting height:||97 cm (81-178 cm) (38.2 in (31.9-70.1 in))|
|Lifting speed:||0-5,5 cm/s (0-2.17 in/s)|
The Lifting Column is a great tool for your stage design to elevate your stage props such as moving heads, platforms or other stage items.
It is great both for permanent stage setups, touring and other projects.
The Lifting Column is designed with an integrated DC Motor Controller. This is a great advantage because it is very easy to control since you can control everything directly from your lighting desk via DMX. It is a very compact design with an integrated guide and actuator pushing your equipment from 97 cm – from 81 cm up to 178 cm.
It is your simple elevation tool for lights, moving heads, props, platforms and other light items in concerts, shows or theater production.
You can control the Lifting Column with just 3 DMX channels. With these channels you can control both the positions, lifting speed and limits as well as reset functions.
It has highly accurate positioning control with the DMX control. Furthermore, it is easy to transport, so perfect for touring events and on-site productions.
With up to 60 kilos of pushing capacity it makes your possibilities countless. You can use the Lifting Column for many purposes to make elevating effects for your stage equipment.
Additionally, it is also possible to mount the unit at different angles and push the equipment in different angles. For sideways mounting the load limit is 10 kilos.
There is no risk of rotation/twisting since the shaft is fixed. It has been reinforced with an optimized motor housing that is designed for extra strength and stability. In other words, your equipment is very stable both in still positions and while in motion.
You can easily daisy chain several Lifting Columns with the power in-out and DMX in-Out. This allows you to create advanced and dynamic movements with 100’s of lifting columns working together in the same installation.
The content of the Lifting Column package
1 x Lifting Column
1 x Neutrik PowerCon NAC3FX-W female plug for power cable
1 x User manual
1 x Cheat sheet
|Power supply||100-240 V AC 50-60 Hz|
|Power consumption||Max 150 Watt|
|Power inlet/outlet||Neutrik PowerCON TRUE1 NAC3PX (F/M)|
|Motor||24 V DC|
|DMX control signal||DMX 512 1990 + DMX 512A|
|DMX connection||5 pole XLR, In & link|
|Lifting capacity - Pushing up||60 kg (132.3 lb)|
|Lifting capacity - Pulling up||Not recommended|
|Lifting capacity - Pushing sideways||10 kg (22 lb)|
|Lifting height||97 cm (81-178 cm) (38.2 in (31.9-70.1 in))|
|Lifting speed||0-5,5 cm/s (0-2.17 in/s)|
|Noise emission||55 dB max (measured noise at 1 m /3.3 ft)|
|Weight||12 kg (26.5 lb)|
|Dimensions||296 x 178 x 812 mm (11.7 x 7.01 x 32.0 in)|
0,00 € without taxes