The Projector shutter with on/off button is a tool for shutting out waste light from the video projector.
The shutter consists of a flap mounted on a motor controlled by an external ON/OFF button
The cable to the button can eaily be extended by a standard microphone cable.
The Projector shutter with on/off button – more options
It is possible to program the projector shutter as a normal light fixture and hence add it to the cue list.
It is easy to mount the shutter, the motor part only weighs 300 gram ( 10,5 ounces) .
The shutter with On/OFF switch can also be controlled by DMX.
1 Projector shutter unit
1 ON/OFF button
1 Small flap (diam. 100mm/3,9 Inch)
1 Big flap (diam. 140mm /5,5 Inch)
1 Screwdriver for mounting the flaps
1 Power plug: Either EU, US, AU or GB plug (please select when you order)
Mega Flap (diam. 210 mm/ 8,2 inch) for wide angle lenses
Pin connections in the 5 pole XLR plug male/female mounted on the shutter
1 GND/0 volt
2 DMX data +
3 DMX data –
4 +5 volt DC, for the lamp inside the ON-OFF box. (ON-OFF function only
5 Signal from the ON-OFF button; connect to GND to get shutter action. (ON-OFF function only)
The projector shutter has been tested worldwide. Watch this recommendation from down under.
|Shipping Weight||2kg / 4.41 lbs|
|Shipping Dimensions||31 x 22 x 6 cm / 12.20 x 8.66 x 2.36 inches|
|Dimensions shutter box||
31 x 22 x 6 cm /
13 x 6.5 x 4 cm /5.12 x 2.5 x 1.6 inches
|Dimensions ON OFF box||
90 x 62 x 40 mm/ 3,5 x 2,4 x 1,6 Inch ( L-W-H)
0,6 kg /1,1 Lbs
120-230 Vac 50/60 Hz
60 degrees -0,16 sec.
|ON OFF control||
By ON/OFF bottom, short circuiting pin 1 and 5
|ON OFF control address||
Put the DMX address at 701 to 709 (1-9 gives the shutter angle)
|ON OFF cable||
30 cm. 3-pole XLR male 5-pole XLR female.
5 pole XLR, Male & Female
EU, US, AU or GB
|Manual - Projector Shutter 130 -English||Download|
|Pamphlet - Projector Shutter -English||Download|
Pricing and purchase options