Projector Shutter DMX-controlled
The Dmx projector shutter is mounted on top of the projector, so the flap can turn in front of the lens in order to block the light from the projector.
The flap is mounted on a motor controlled by a DMX signal from the lighting desk.
It is possible to programme the projector shutter as a normal light fixture and add it to the cue list for example.
It is easy to mount the shutter, the motor part only weighs 300 gram ( 10,5 ounces).
With the DMX Projector Shutter, you can quickly make a cue for a blackout, and eliminate all black light coming from your projector.
Finally, there is no need for homemade DIY projector dowser solutions. A single channel DMX-control and the fast shutter makes a small, but annoying problem go away.
1 Projector Shutter unit
1 Small flap (diam. 100mm/3,9 Inch)
1 Big flap (diam. 140mm /5,5 Inch)
1 Screwdriver for mounting the flaps
1 Power plug: Either EU, US, AU or GB plug ( please select when you order)
Pin connections in the 5 pole XLR plug male/female mounted on the shutter
1 GND/0 volt
2 DMX data +
3 DMX data –
4 +5 volt DC, for the lamp inside the ON-OFF box. (ON-OFF function only)
5 Signal from the ON-OFF button; connect to GND to get shutter action. (ON-OFF function only)
The Projector Shutter is often mentioned on the internet. Watch this recommendation from down under :
|Shipping Weight||2kg / 4.41 lbs|
|Shipping Dimensions||31 x 22 x 6 cm / 12.20 x 8.66 x 2.36 inches|
|Dimensions shutter box||
31 x 21 x 8 cm / 12.20 x 8.27 x 3.15 inches
13 x 6.5 x 4 cm /5.12 x 2.5 x 1.6 inches
120-230 Vac 50/60 Hz
60 degrees -0,16 sec.
EU, US, AU or GB
0.5 kg / 1.1 Lbs
|Projector Shutter 110 - manual - English||Download|
|Projector Shutter - pamphlet - English||Download|
Pricing and purchase options