Wahlberg Motion Design is a creative company devoted to the creation, innovation and design of products to create automatic DMX effects of stage props and lights.
Large roll down system for very fast rolling of your fabrics on stage.
|Lifting capacity:||35 kg (77 lb)|
|Lifting speed:||5-120 cm/s (2-47.1 in/s)|
|Tube length:||1,5-6 m (4.9-19.6 ft)|
The High-speed Roll Down can create quick motion for displaying and rolling your fabrics very fast.
It is very compact where the motor is fully located within the roll tube. You can fit the roll drum to your preferred length between 1,5-6 m (4.9-19.6 in)
Furthermore, you have full control of the speed between 5-120 cm/s (2-47.1 in/s) thanks to the integrated DMX control system.
Our High-speed Roll Down is a perfect solution for controlling your fabrics on stage.
With the new DMX High-speed Roll Down the classic roll drop technology has been reinvented. It is now easier than ever operate and install. Furthermore, it is drastically more affordable, so you can apply it in any situation where you need to be able to control your fabric in an easy and effective manner.
Easily mount your fabric onto the tube and make it visual at the perfect timing for your show. The fast motor of the High-speed Roll Down makes sure that you can achieve just the right effect you are looking for.
Thanks to the DMX control you can control everything directly from the lighting desk.
There are many ways of which the High-speed Roll Down can be implemented I a stage design. A way of using it could be for backdrop projection screen purposes.
You can mount projection screen fabric on the drum, and this way make your screen appear whenever you need it in the show, as well as make it disappear again.
As mentioned, you can mount almost any fabric to the drum, and therefore it is a very flexible product that creates a lot of opportunities for your areas of use.
It is not just for one project, but you can apply this for many different occasions for your stage.
To make sure that you can enjoy all the great features the High-speed Roll Down is designed in a very user-friendly way. Simple to install and very easy to use.
It is created with Powerful AC motors with 16-bit DMX encoders that are located inside the roll down itself. It is very compact and filling as little space as possible.
Hanging the drum is simply a matter of mounting the half-clamps to your pipe, truss or overhead points. Afterwards, you simply provide power and DMX and the installation is complete. There are no drive chains, limit boxes, or other gadgets to connect.
The High-speed Roll Down can be custom made with tube lengths between 1,5 m and up to 6 m (4.9 f up to 19.6 ft). We can make the drum fit any length of your fabric.
An optional length of up to 10 m (32.8 ft) is possible with a built-in splicing unit.
Both position, speed and operating range can be controlled by using the integrated DMX interface. An LCD display with simple menu for adjusting the DMX channels, motor parameters and functionality. After this you can control the High-speed Roll Down directly from the lighting desk.
Variable speed and precise positioning provide an easy and effective tool for curtain motion of your requirements. You only need 6 DMX channels to control your fabric.
You can easily implement the movements to a cue list in the lighting desk and this way integrate the High-speed Roll Down directly into the existing show.
The content of the High-speed Roll Down (2 m) package
1 x High-speed Roll Down
4 x Manfrotto Slim couplers
1 x PowerCON NAC3FX-W female plug for power cable
1 x User manual
1 x Cheat sheet
|Power supply||200-240 V AC 50-60 Hz|
|Power consumption||Max 500 W|
|Power inlet/outlet||Neutrik powerCON TRUE1 NAC3PX (F/M)|
|DMX control signal||DMX 512 1990 + DMX 512A|
|DMX connection||5 pole XLR, male & female|
|Lifting capacity||35 kg (77 lb)|
|Lifting speed||5-120 cm/s (2-47.1 in/s)|
|Lifting height||18 m (59 ft)|
|Mounting clamp||4 x slim eye coupler 50 mm (2 in)|
|Noise emission||70 dB|
|Motor||230 V AC, 0.55 kW|
|Motor speed||2800 rpm|
|Duty cycle||Maximum 30 % at max. Load Minimum 23 min OFF after 10 minutes ON|
|Ambient temperature||0-40 °C (32-104 °F)|
|Tube length||1,5-6 m (4.9-19.6 ft)|
|Shipping weight||60 kg (132.28 lb)|
|Weight - Motor Clamp||40 kg (88.2 lb)|
|Weight - Tube||5,1 kg/m (3.43 lb/ft)|
|Dimensions - Motor Clamp||81,6 x 230 x 345 mm (3.2 x 9.1 x 13.6 in)|
|Dimensions - Tube||Ø200 x 1500-12000 mm (Ø7.87 x 59.1-472.4 in)|
0,00 € without taxes