Wahlberg Motion Design is a creative company devoted to the creation, innovation and design of products to create automatic DMX effects of stage props and lights.
Make your stage design come alive by including our Track Runner Upright in your show.
|Lifting capacity:||14 kg ( 31 lb)|
|Lifting speed:||5-30 cm/s (2-12 in/s)|
|Wireless DMX:||2.4 GHz ISM Band / 100mW (CRMX inside)|
Create vertical moving effects such as uprising lights by mounting a moving head or similar.
You can mount almost any scenic element up to 20 kilos and create moving vertical effects. Place it anywhere you want to fit your scene design.
The Track Runner Upright makes your moving heads or other scenic elements in your show fly. You can move your stage props very smoothly thanks to the DMX control. Start and stop the unit anywhere along the track.
If you are designing a show where you have stage equipment that needs vertical movements for uprising effects, you can use our Track Runner Upright for this.
Especially if you want to make your scene light up you can mount your moving heads and make them move up to a given point with a given speed. This is all up to you as you have full control over all movements and speed of the Track Runner Upright.
You get maximum flexibility, and it is not just applicable for one specific project but can be used for several shows. Use it on our Tooth Rack Track Profile or Tooth Rack Track Profile with Conductor Rail.
The speed, positioning, and range of operation is all controlled via DMX directly from a lighting desk or separate controller. This means that you can program all movements and positions to fit any requirements of the project you are including the Track Runner Upright in.
With power and DMX outlets, it is easy to attach and control any DMX unit you would like to the Track Runner Upright. Make beautiful stage designs by adding vertical moving effects for your stage props electrical or nonelectrical. For horizontal moving effects, check out our Track Runner with Cogwheel or Track Runner with Friction Wheel.
You can make up to 3 meters of vertical movements with only bottom fixation. However, if the track is fixed appropriately to a truss or similar the Track Runner Upright can run on any height of track.
The content of the Track Runner Upright package
1 x Track Runner Upright
1 x Cheat sheet
1 x User manual
|Power consumption||300 W|
|Power supply||200-240V AC 50-60 Hz|
|Power inlet/outlet||Neutrik powerCON TRUE1 NAC3PX (F/M)|
|DMX control signal||DMX 512 1990 + DMX512A|
|DMX connection||5 pole XLR, male & female|
|Lifting capacity||14 kg ( 31 lb)|
|Lifting speed||5-30 cm/s (2-12 in/s)|
|Noise emission (AT 1 m)||~ 50 dB|
|Motor||24V DC, 250 W|
|Wireless DMX||2.4 GHz ISM Band / 100mW (CRMX inside)|
|Shipping weight||16 kg (35.2 lb)|
|Weight||15 kg (33 lb)|
|Dimensions||224 x 239 x 308 mm (8.8 x 9 x 12.1 in)|
|Duty-Cycle||50% when running more than 30 min.|
0,00 € without taxes