Winch 25 Curtain is a curtain winch ideal for lifting fabric such as contour curtains and similar theatrical stage props.
The Winch 25 Curtain is to be found in theatres, shows and concerts all over the world.
Apart from being ideal for lifting fabric, this dmx controlled winch is great for lifting props and small set pieces in and out of the stage sphere at a maximum load of 25 kg up and down.
The lifting height is 10 m. The lifting speed is between 5 cm/s and 40 cm/s.
Winch 25 Curtain is a pile wind winch, which means it has a centered lifting point and thus no wire fleeting.
With no wire flee and integrated wire slack detection the wire doesn’t jump the reel and avoids getting tangled, even if you are lifting a static load such as a scenery curtain or a backdrop.
The Winch 25 Curtain is controlled by the standard DMX controlling signal, so a normal lighting desk can be used to control the movement.
Parameters such as 16-Bits position, speed and top and bottom limits, makes it easy to make your curtain move exactly as intended.
The nylon coated wire makes the winch run quietly and is great for long time use.
This curtain winch makes it easy to run your cues from the lighting desk, and in seconds your stage curtain will take form as a beautiful contour curtain.
So if you considering integrating DMX automation into your theater or venue, the winch 25 Curtain might be the next curtain winch for you.
The Content of the Winch 25 Curtain Package:
1× Winch 25 Curtain
2× Manfrotto slim coupler
1× PowerCON NAC3FX-W female plug for power cable
1× User manual
1× Cheat sheet
Check out our DMX winches controlling this contour curtain below:
Winch 25 Curtain
200-240V AC 50-60 Hz
Neutrik powerCON TRUE1 NAC3PX (F/M)
|DMX control signal||
DMX 512 1990 + DMX512A / 6 channels used
5 pole XLR, male & female
10 m (33 ft.)
25 kg (55 lb)
Variable, 0.05-0.4 m/s (2-15.7 in/s)
230V AC, 0.25 kW 2 800 rpm
16 kg (35.3 lb)
184 × 229 × 375 mm (7.24 × 9.01 × 14.76 in)
|Manual Winch 25 Curtain||Download|
Pricing and purchase options