The Winch 10 is a small winch for lifting your medium sized props, screens, drapes etc.
inside and outside the stage area.
Several winches can easily be connected as a chain, allowing for advanced and creative ways
of making dynamic movements of large items or a number of items.
The winch is controlled from the lighting desk, and hence movements on stage can be controlled
in interaction with the lighting to add dynamism to the show.
The Winch 10 has a lifting height of 10m (33 ft) and has a built-in positioning system
which facilitates locating objects in the desired position.
The positioning system is controlled from a 16 bit DMX channel
and is highly accurate; the winch stops within 1 mm.
The speed of the winch is also controlled from the lighting desk, and it is possible to set the upper
and lower limits of the movement of the winch, thus adjusting its range of motion.
Contents of a standard Winch 10 package :
1 Winch 10
1 Manfrotto Slim coupler
1 Mounting bolt, nut, and washers (M12) for slim coupler mounting
1 Neutrik PowerCon NAC3FX-W female plug for power cable
1 8 mm snap hook
1 Instruction manual
1 Cheat sheet
How has it been used:
Artists and performers all over the world have used the winches as technical devices in making curtains,
lamps and other elements move in formation or individually.
Please watch the videos below in order to find inspiration for using the Winch 10.
You may also have a look at our Portfolio :
Please read about the Maria Pagés project Utopia on our Portfolio page.
|Shipping Weight||6kg / 13.23 lbs|
|Shipping Dimensions||26 x 23 x 30 cm / 10.24 x 9.06 x 11.81 inches|
230 V AC 50 Hz (optional 120V/60 Hz)
Neutrik powerCON TRUE1 NAC3PX
|DMX Control Signal||
DMX 512 1990 + DMX512A / 7 channels used
5 pole XLR, in & link
10m (33 ft)
10 kg (22 lb)
Variable, 5-30 cm/sec (2-11.8 in/sec)
8 mm (5/16 in) galvanized steel
|Capability of overload test||
Yes, at 125 % of maximum load
|Wire fleet angle||
0.4 kg (0.88 lb)
10 kg (22 lb )
~ 55 DB ( max measured noise at 1 m/3.3. ft)
Slim eye coupler 50 mm ( 1 31/32 in)
24 V DC, 28.9 Watt, IP 30
2 mm ( 5 6/4 in) galvanized steel wire
|Minimum breaking load (wire)||
2.75 kN (280 kg/ 618 lb)
|Wire safety factor||
|Max expected wire lifetime||
At 2.5 kg load Up to 80,000 cycles running up and down
5.2 kg (11.5 lb)
24 x 21 x 15 cm / 9.5 x 8.3 x 5.19 in
|Manual - Winch 10 - English||Download|
|Cheat Sheet Winch 10||Download|
|Product pamphlet - English||Download|