Winch 50 Double is a wire winch for stage use, mainly for use in theatres, shows and concerts.
It lifts props and small set pieces in and out of the stage sphere at maximum load of 50 kg up and down.
The lifting height is 40 m. Contact Wahlberg Motion Design for extending your lifting height.
The lifting speed is between 9 cm/s and 45 cm/s.
The winches are easily connected as a chain, allowing for advanced and creative ways of making dynamic movement
The control system ensures that the motor only is powered when:
• The control signal is reliable.
• The position and speed control is on.
• The motor position is calculated after witch a PID regulator calculates the motor speed and distance.
• No overload.
Content of the Winch 50 Double package:
1 × Winch 50
1 × PowerCon NAC3FX-W female plug for power cable
1 × PowerCon NAC3FX-W female plug for lifting wire power
1 × Instruction manual
1 × Cheat Sheet
Winch 50 Double
797 × 298 × 445 mm / 31.4 × 11.7 × 17.5 in (Without mounting clamp)
200-240V AC 50-60 Hz.
Neutrik powerCON TRUE1 NAC3PX (F/M)
|DMX control signal||
DMX 512 1990 + DMX512A / 6 channels used.
5 pole XLR, male & female
12.5 m (41.0 ft.)
50 kg (110 lb)
Variable, 9-45 cm/s (3.5-17.7 in/s)
5 kg (11 lb)
|Noise emission (At 1m)||
45 kg (88.2 lb)
4× Slim eye coupler 50 mm (2 in)
230V AC, 0.55 kW 2800 rpm
Maximum 30% at max. load
83 mm (3.27 in)
Pricing and purchase options
For info and quotations Drop us a line ➤