Description

DMX rotator with power outlet

This version of the DMX rotator has a power outlet that allows for rotating items that need electricity: fx LED-screens or lamps.
You can also combine a rotating object with an electrical unit (actuator or lamp) in an installation.

The possibilities are endless.

Use the DMX rotator with power outlet for:
  • christmas trees – with light chains
  • mirrorballs – with a light projecting onto it
  • LED – screens

Turns 360 degrees  with full DMX control.

Can be mounted vertically or horizontally, and is operated via a DMX controller.

 

Package content :
1× Rotator 281
3× Manfrotte Slim coupler
3× Mounting bolts, nuts, and washers (M12) for slim coupler mounting
1× PowerCON TRUE1 NAC3FX-W Female plug for power cable
1× SpeakON SPX NL4FX Female plug for power/signal-throughput
1× SpeakON SPX NL4FX Male plug for power/signal-throughput
1× Shaft Mounting Clamp
1× User manual
1× Cheat Sheet

This is how it works:

The Rotator is an advanced mirror ball motor with DMX control.
The motor can spin with variable speed,  both clockwise and counter clockwise.
The motor has a servo – positioning system, with different operation modes.
It’s possible to spin the motor continuously with variable speed for some minutes, change direction during spinning,
and then, when needed,  stop the motor at a certain angle.

The Rotator is often used to rotate curtains, banners, huge mirror balls  or other kinds of set pieces in the theater,
show and exhibition area.
With a simple DMX interface it’s easy to integrate advanced and dynamic movements to the show,
and it’s possible to make precise and smooth operations.

The output shaft is made of 20 mm iron shaft. The shaft has a 10 mm tread in the end, and also a 10 mm hole sideways in the shaft
(see detailed dimensions under Technical Details)  Both holes are used for mounting the rotation object.

The Rotator is made for applications hanging from the ceiling, with rotation around a vertical shaft.
Horizontal rotation is only possible with a very limited weight, or if the load is supported with extra bearing
so that the product is not carrying the full horizontal load.

Use the Rotator virtually anywhere you need simple but precise motorized control of a spinning set piece.
Consider it for moving clock hands, rotating signs, motorized window or door pivots, advanced mirror ball effects,
periaktoi, rotating mirror panels, or anything else that a designer imagines.

 

See the DMX rotator with power outlet used for a light installation at the North Side Festival, Northside tower

Technical Details

Shipping Weight 11.8kg / 26.01 lbs
Shipping Dimensions 25.8 x 17.8 x 35.7 cm / 10.16 x 7.01 x 14.06 inches
Item no.

281

Power supply

100-240 V AC 50 Hz/ 60 Hz

Power Consumption

150 W

Power inlet/outlet

Neutrik powerCON TRUE1 NAC3PX (F/M)

DMX control signal

DMX 512 1990 +DMX 512A/ 7 channels used

DMX connection

5 pole XLR , In & Link

Rotation limit

No limit/ continuous rotation

Rotation speed

0.15-6.8 rpm

Working load limit ( WLL)

Shaft – down 150 kg (330 lb)
Shaft – up 100 kg (220 lb)
Shaft – sideways 50 kg (110 lb)

Safety factor

10

Noise emission

~ 50 dB ( max measured noise at 1 m/3.3 ft)

Ambient temperature

0-40 C ( 32-104 F)

Mounting clamp

3 x slim eye coupler 50 mm ( 2 in)

Motor

24 V DC

Maximum attachment current

1+ / 1 – / 2 + / 2 – (1.5 mm) : 10A through each conducting wire
Inlet/ outlet: Neutrik SpeakOn NL4MP/NL4FX

Weight

11.8 kg/ 26 lb

Dimensions ( L-W-H)

258 x 178 x 317 mm / 10.2 x 7.0 x 12.5 in

Name Language
  Manual rotator version 280 and 281 - English Download
  Cheat sheet rotator version 280 and 281- English Download
  Data sheet rotator version 281 - English Download

Pricing and purchase options

Related products